As one of the core components of the equipment, linear rails play a guiding and supporting role. In order to ensure the high machining accuracy of the machine, the linear rail rails are required to have high guiding accuracy and motion stability.
During the operation of the equipment, a lot of corrosive dust and fumes will be generated during processing. Since these dusts accumulate in the linear rail, the processing accuracy of the equipment will be greatly affected, and the service life of the equipment will even be shortened.
In order to make the equipment work normally and ensure the processing quality of the products, the daily maintenance and maintenance of the linear rail must be done well. Cleaning the linear rail requires dry cotton cloth and lubricating oil.
The correct operation method for cleaning the linear rail is: move the laser head to the right before cleaning, or move the laser head to the left. Then the linear rail will be presented in front of us, at this time, scrub it repeatedly with a clean rag. Instruct to wipe the rails until they are shiny. Finally, the prepared lubricating oil can be evenly coated on the linear rail.
As one of the core components of the equipment, the guide rail and the linear shaft are used for guiding and supporting. In order to ensure the high machining accuracy of the machine, its guide rails and straight lines are required to have high guiding accuracy and good motion stability.
During the operation of the equipment, a large amount of corrosive dust and smoke will be generated during the processing of the workpiece, and these smoke and dust will be deposited on the surface of the guide rail and the linear axis for a long time, which has a great impact on the processing accuracy of the equipment, and corrosion spots are formed on the surface of the linear shaft of the guide rail, which shortens the service life of the equipment. In order to make the machine work normally and stably and ensure the processing quality of the product, it is necessary to do a good job in the daily maintenance of the guide rail and linear axis.
Note: Please prepare dry cotton cloth and lubricating oil to clean the linear rail. The guide rails of the engraving machine are divided into linear rails and roller guides.
Steps for cleaning the linear rail: first move the laser head to the far right (or left), find the linear rail, wipe it with a dry cotton cloth until it is bright and dust-free, and add a little lubricating oil (you can use sewing machine oil, do not use oil) , slowly push the laser head left and right several times to distribute the lubricating oil evenly.
Cleaning of the roller guide rails: move the beam to the inside, open the end covers on both sides of the machine, find the guide rails, wipe the areas where the guide rails on both sides contact the rollers with a dry cotton cloth, and then move the beam to clean the rest.
As a leading cnc spare parts manufacturer in China, HYCNC is devoted itself to providing one-stop purchase service for CNC parts, including those used for CNC router, CNC machining center, stone working machine, CO2 laser engraving machine and fiber laser machine, etc. Therefore, if you are looking for frelated products, feel free to contact us!