English 
中文 
한국어 
français 
Deutsch 
Español 
русский 
português 
العربية 
Polska 
Svenska 
Nederland CO2 Power Supply
model: | W1/W2/W4/W6/W8/T1/T2/T4 |
power: | 75w/90w/100w/130w/150w/75w/90w/100w |
length: | 1050/1200/1400/1650/1850/1110/1250/1400/1650 |
Pipe diameter: | 80/80/80/80/90/65/65/65/65 |
catalyst: | Yes |
model: | W1/W2/W4/W6/W8/T1/T2/T4 |
power: | 75w/90w/100w/130w/150w/75w/90w/100w |
length: | 1050/1200/1400/1650/1850/1110/1250/1400/1650 |
Pipe diameter: | 80/80/80/80/90/65/65/65/65 |
catalyst: | Yes |
The first is to select the power according to the power label on the original power supply of the machine.
The second is to choose according to the power of the laser tube. For example, if the power of the laser tube is 80w, the power supply is equipped with 80w. If there is no label on the tube, you can measure the size of the tube to know the power of the tube, and at the same time you can know the power supply.
The most important thing is: the power interface should be the same as the original power interface of the customer, so that it can be operated like the previous wiring.
