English 
한국어 
français 
Deutsch 
Español 
русский 
português 
العربية 
Polska 
Svenska 
Nederland 100mm 4.5kw Spindle Motor For Stone Working
model: | GDZ-100-4.5 |
Dimensions: | Φ100*260Φm/m |
Rotating speed: | 24000RPM |
power: | 4.5KW |
Voltage: | 220v/380V |
frequency: | 400HZ |
Bearing: | Four bearings |
cooling method: | Water cooling |
Chuck nut: | ER20 |
Current: | / |
model: | GDZ-100-4.5 |
Dimensions: | Φ100*260Φm/m |
Rotating speed: | 24000RPM |
power: | 4.5KW |
Voltage: | 220v/380V |
frequency: | 400HZ |
Bearing: | Four bearings |
cooling method: | Water cooling |
Chuck nut: | ER20 |
Current: | / |
1. Spindle motor should be used with the inverter. The specifications and parameters of the inverter should match the rated parameters of the spindle motor. If these settings are incorrect, the spindle motor will then be easily burned.
2. Before use, the water-cooled spindle motor must ensure that its cooling circulation system can work normally, and it is prohibited to use any water cooled spindle motor without cooling water.
3. During the storage and transportation of the spindle motor, the state of the high-speed grease inside the bearing will change, and the customer should run the spindle motor at a low speed before use.
