English 
中文 
한국어 
français 
Deutsch 
Español 
русский 
português 
العربية 
Polska 
Svenska 
Nederland JST 800w Round Air Cooled Spindle Motor
model: | JGF-F65A-800W |
Dimensions: | Φ65 |
Rotating speed: | 24000RPM |
power: | 0.8KW |
Voltage: | 220V |
frequency: | 400HZ |
Bearing: | Four bearings |
cooling method: | Fan cooling |
Chuck nut: | ER11 |
Current: | / |
model: | JGF-F65A-800W |
Dimensions: | Φ65 |
Rotating speed: | 24000RPM |
power: | 0.8KW |
Voltage: | 220V |
frequency: | 400HZ |
Bearing: | Four bearings |
cooling method: | Fan cooling |
Chuck nut: | ER11 |
Current: | / |
The electric spindle and the inverter should be used together. The specifications and parameter settings of the inverter should match the rated parameters of the electric spindle. If the settings are incorrect, the electric spindle will be burned.
The air-cooled electric spindle uses a fan for heat dissipation, and the fan should be operated normally during use.
During the storage and transportation of the electric spindle, the state of high-speed grease inside the bearing will change, and the customer should run the spindle at a low speed before use.
