English 
한국어 
français 
Deutsch 
Español 
русский 
português 
العربية 
Polska 
Svenska 
Nederland Shun Tong 800w Woodworking Advertising Water-cooled Spindle Motor
model: | WH65 800W |
Dimensions: | Φ65 |
Rotating speed: | 24000RPM |
power: | 0.8KW |
Voltage: | 220V |
frequency: | 400HZ |
Bearing: | 3 bearings |
cooling method: | Water cooling |
Chuck nut: | ER11A |
Current: | / |
model: | WH65 800W |
Dimensions: | Φ65 |
Rotating speed: | 24000RPM |
power: | 0.8KW |
Voltage: | 220V |
frequency: | 400HZ |
Bearing: | 3 bearings |
cooling method: | Water cooling |
Chuck nut: | ER11A |
Current: | / |
Shun Tong 800W woodworking advertising water-cooled spindle motor should be used with the inverter. The specifications of the inverter should also match the parameters of the spindle motor. If not doing so, the spindle motor will get burned.
Before use, the water-cooled spindle motor must ensure that its cooling circulation system is working normally, and it is prohibited to use the spindle rotor without cooling water.
As the state of the high-speed grease inside the bearing will change during transportation, this router spindle motor should be run at a low speed during the first use.
