Contact Us
Yako YKD2405M-DS Driver1
Yako YKD2405M-DS Driver2
Yako YKD2405M-DS Driver3
Yako YKD2405M-DS Driver4
Yako YKD2405M-DS Driver1

Yako YKD2405M-DS Driver

Product Name:

yako YKD2405M-DS driver

Operating Voltage:

DC20V-50V

Applicable motor:

57, 86 stepper motor

Weight:


Features:

1. The current control is smooth and precise, and the motor heat is small

2. High cost performance, good stability, excellent noise and vibration performance

3. It is convenient to set the current, which can be arbitrarily selected between 1.5A-4.0A (effective value)

4. With over-voltage, under-voltage, short circuit and other protection functions

5. Ultra-low vibration noise

6. Impulse response frequency up to 200KHz

Commonly used 40v 400w DC power supply, one power supply can support up to 3pcs driver power supply

Package Dimensions:


Instructions For Use:

The cnc driver drives the servo motor.The driver needs to select a power supply according to its self voltage range to power the driver, and then connect the driver with the servo motor, and the control system, the control system will control machine running.


Solution of Yako YKD2405M-DS Driver

phenomenon

Possible problem

solution

The motor does not rotate

Power light is off

Working normal  

Current setting is too small

According to the rated current of the motor, select the appropriate current gear

Drive is protected

After the fault is excluded, power on again

Enable signal is low

This signal is pulled high or not connected

Wrong connection of motor wire

Arbitrarily exchange two wires of the same phase of the motor (for example, A + A- exchange wiring position)

Wrong direction of motor rotation

Motor wire is broken

Check and connect

Wrong connection of motor wire

Check wiring

Alarm indicator light

Wrong connection of motor wire

Arbitrarily exchange two wires of the same phase of the motor (for example, A + A- exchange wiring position)

The voltage is too high or too low

Check the power supply voltage

Damaged motor or driver

Replace motor or driver

Inaccurate location

Signal is disturbed

Eliminate interference

Shielded ground wire is not connected or not connected

Reliable ground

Segmentation error

Set subdivision correctly

Current is too small

Increase the current appropriately

Control signal problems

Check whether the control signal meets the timing requirements

Stall when the motor accelerates speed

The acceleration time is too short

Increase the acceleration time appropriately

Motor torque is too small

Choose high torque motor

Low voltage or too low current

Properly increase the voltage or set a larger current


Solution of Yako YKD2405M-DS Driver
Related articles
CNC Troubleshooting Methods
CNC machine tool is a complex automatic machine tool with high technical content that integrates mechanics, electricity and instruments. During the operation of the machine tool, parts and components ...
Jun 08,2022
Thank you for your attention
on HYCNC
If you want to know more information of CNC spare parts, please fill in the form, we will get back to as soon as possible.
0
INQUIRE BASKET(0)
Empty
Inquires
Room 1805-A, Building A, Binhe Business Center, Beiyuan Street, Tianqiao District, Jinan City, Shandong Province,China
sales@hycncrouter.com
+8615098715557