The CNC router helical or straight rack belongs to the CNC router transmission system and it plays a very important role in the operation of the entire machine. The operation accuracy of the equipment largely depends on the installation skills and assembly experience of the assembler. So, how to install the helical or straight rack is particularly important. if you still don't know how to install a CNC machine rack? Don't worry, HYCNC is right here to help and share the information with you.
Take a rack that is opposite to the existing helical or straight rack (right helical rack use left helical rack) to bite the two racks together, and then fix them with tool.
Check the tightness of meshing between teeth, ensure full engagement.
Up, down; left and right sides, all use fixed clamps to fix them, to ensure that the fixation is strong and there is no gap.
After the rack is fixed, start to punch holes. When punching holes, they must be parallel to ensure that the holes are not crooked.
Tapping is also very important. Every action and every skill is to ensure the accuracy of the equipment.
Use pneumatic tools, install screws, and finally manually check whether the fixation is completed well or not .
After the rack installation is completed, check the horizontal straightness of the rack, pay attention to the height difference of the rack, and finally add lubricating oil to prevent rust.